• Partlow MIC 8200 Process Controller

Partlow MIC 8200 Process Controller

This product is no longer sold by FLW.

Are you buying in volume? Are you an OEM? Are you a reseller? Be sure to contact FLW directly for your special pricing.  
MIC 8200
Shipping Weight:
3.00 LBS


The MIC 8200 is a ¼ DIN, microprocessor based, dual digital display, dual setpoint, single loop, auto tune, process controller capable of controlling a variety of processes including those requiring simple on-off to dual 4-20mA outputs with full PID, while providing an operator with constant visual indication of process and setpoint.

The top display may be programmed to show the process variable or deviation from setpoint. The lower display, when programmed, is keypad selectable to show setpoint 1, setpoint 2, or percent output.

Options include single or dual 4-20mA output, up to thouree relay outputs, thouree types of alarms, remote setpoint input, electric motor modulation, and RS-485 communications. Process value retransmission output is also available.

Access to configuration parameters and setpoint may be restricted by using the instrument's security-access mode.

  • ¼ DIN for easier viewing
  • CSA certified, CE, and UL recognized
  • Universal input or specified input
  • Relay, solid state relay driver, or 4-20mA outputs
  • Transmitter Power Supply
  • Position Proportioning
  • RS-485 Communications
  • Remote Setpoint
  • Power Supply 90-264VAC or optional 24V AC/DC

Product Specifications


Thermocouple types:J, K, T, R, S, E, B, N, and C
RTD:100 ohm (.00385 Ohm/Ohm/C)
Volts:0 to 5VDC, 1 to 5 VDC
Millivolts:0 to 25mVDC, 0 to 50mVDC, 10 to 50mVDC
Milliamps:4 to 20mADC, accommodated via the addition of a shunt resistor
Remote Setpoint:0 to 5VDC, 1 to 5 VDC
Sensor Fault Detection:Displays Hi or Lo for thermocouple or RTD inputs (10% above or below range) and sensor break, SnSr. On/Off outputs go off, proportional outputs go to 0%. Sensor fault detection is not functional for 0 to 5VDC
115VAC: 5.0 A Resistive; 1/8 HP or 250VA
230VAC: 2.5 A Resistive; 1/8HP or 250VA
SSR Driver: Open collector output
Short circuit protected at 100mA maximum
Provides 4VDC at 20mA or 3VDC at 40mA
Current Output:4-20mADC into 650 ohms maximum

Literature & Docs