Description Specifications Description This item has been discontinued and replaced by the T77530-40.The TACHPAK 10 is a computing speed switch that also measures input frequency. This dual channel device does not include the function of converting measured quantities to solid state relays, analog output, or the utility RS485 communication.The TACHPAK 30 and TACHPAK 10 accept an extensive range of AC or DC power. These instruments have great accuracy, processing speed, response time and can be used in rate period or counter mode.Included FeaturesQuicker Response Time-706 ms (analog), 16.5 ms (mech. Relays), 2ms (dig. Relays)Higher Level of Accuracy - 0.1% (analog), 0.005% (relays)Field Programmable - With TACHLINK or TACHTROL plusDigital Configuration - Approaches real timeAnalog Outputs - 0 -20 mA, 4-20 mA, -20 to 0 to +20 mARelays - (2) mechanical Form C, 6 A @ 277 Vac, (2) solid state Form A 0.4 A @ 60 Vac or DCDigital Display -Will accept (8) TACHTROL plus remote displays9 Computed Functions State of California Proposition 65 WARNINGCancer and Reproductive Harm - www.P65Warnings.ca.gov. Product Specifications Analog Output Ranges:0 to 20mA, 4 to 20mA, -20 to 0 to +20mA; user selectable Accuracy:Internal instrument accuracy: ±.005%;plus ±.05% of full scale range at room temp with 400 ohm load; ±0.1% over temp range and load range. Unit is factory calibrated. Can be re-calibrated using TACHLINK. Resolution:Step size: 610 nanoamps per lbs. 16 bit D/A Linearity:±0.02% typical Loop Impedance:100-1000 ohms Reponse Time:Input to output 6.55 msec+ 1 msec settle at 1kohms (worst case) to .1% of final value Electrical Isolation:500 Vrms continuous Literature & Docs Accessories