• TSI 3 in Air Velocity Transducer 8475-03
  • TSI 3 in Air Velocity Transducer 8475-03

TSI 3 in Air Velocity Transducer 8475-03

$1,605.00 $1,444.501444.5USD
Are you buying in volume? Are you an OEM? Are you a reseller? Be sure to contact FLW directly for your special pricing.  
Quantity:
Availability:
PART NUMBER:
8475-03
Shipping Weight:
3.00 LBS
Shipping:
Calculated at checkout

Description

The Air Velocity Transducer 8475-03 (omnidirectional) is ideal in research and development labs, manufacturing processes, and other applications for both temporary and permanent installations for air velocity measurement. Model 8475-03 provides a linear signal output due to on-board electronics and calibration curves. This linear signal is sent out as either a current (mA) or a voltage (V) signal, allowing output to a variety of data loggers or data acquisition systems. In addition you have the ability to change the current and voltage output ranges easily in less than five minutes.

Included Items:
  • Probe attached to 16.4-ft (5-m) cable connected to control module
  • Protective sleeve
  • Compression fittings for mounting in duct work
  • Two holding clips to mount probe to parallel surface
  • Operation and service manual
  • NIST calibration certificate

Product Specifications

General Specifications

Probe Length:3 in
Accuracy:±3.0% of reading, ±1.0% of full scale of selected range
Field Selectable Range:10 ft/min to 100, 125, 150, 200, 250, 300, 400, 500ft/min (0.05 m/s to 0.5, 0.75, 1.0, 1.25, 1.50, 2.0, 2.5, m/s)
Response to Flow:5 sec
Temperature Range
Compensation:32 to 140°F (0 to 60°C )
Operating (electronics):32 to 200°F (0 to 93°C)
Operating (sensor):32 to 200°F (0 to 93°C)
Storage:32 to 200°F (0 to 93°C)
Output
Impedance:Voltage mode: less than ohm, 20 mA max source current
Resistance:Current Mode: 500 ohms maximum load
Signal:Field selectable 0 to 5V, 0 to 10V, 0 to 20, 2 to 10V, mA, 4 to 20 mA
Time Constant:Field selectable 0.05 to 10 seconds