Description Specifications Literature Accessories Description The 405C 1/16 DIN Timer with instantaneous relay from Automatic Timing and Controls is available with one set of SPDT instantaneous contacts and one set of SPDT delayed contacts. The instantaneous contacts transfer as soon as the timer is powered. The delayed contacts transfer at time out. This contact arrangement can be used to replace many conventional timers. All 405 timers can be powered using 24-240 VAC or 24 VDC power, greatly simplifying ordering and inventory management of replacement units.Features:On-Delay version with instantaneous relaySelectable On-Delay/Interval Timing Mode versionOutput Contacts rated 10A 120/240 VAC and 30 VDCSix Timing Ranges in a single unit: 1 and 10 SEC, MIN, and HRS 5 and 50 SEC, MIN, and HRSUniversal Power Supply: 24-240 VAC and 24 VDC48mm 2 DIN Standard housingLarge and easy to read dial shows decimal pointsRound (octal) socket mount or mount in panel cutoutRange and Mode select are tamperproof when panel mountedUnique flashing cycle progress indication State of California Proposition 65 WARNINGCancer and Reproductive Harm - www.P65Warnings.ca.gov. Product Specifications General SpecificationsRange:Six dial-selected ranges (1 or 10 SEC/MIN/HRS)Voltage & Frequency:24 VDC (low inrush current for short-circuit protected sensors)Arrangements:8-Pin ON-DelayInterval Timing ModesContact Material:Silver NickelMinimum Setting:2% of range, with the exception of 50 mSEC on the 1 second rangeSetting Accuracy:± 5% of rangeTemperature Rating:0 to 122° F (-18 C to 50 C) Literature & Docs Product Specifications Accessories ATC Hold Down For 8 Pin Surface/DIN Rail Socket, 407-025-13-00 Was: Now: $5.16 Add To Cart The item has been added ATC 11-Pin Surface / DIN Rail Socket, 000-825-86-00 Was: Now: $20.64 Add To Cart The item has been added