ATC Adjustable Solid State Single Timer, CS100

The CS100 Repeat Cycle Timer from the Automatic Timing and Controls is a simple repeat cycle timer with selectable T1 (Timer #1), 0 1 to 25 seconds, T2 (Timer # 2) ranges from 0 to 24 seconds, and T3 extends T1 by up to 25 seconds.

The CS100 Repeat Cycle Timer allows quick access to setting of the timing ranges via four front push-buttons. Reset input on the back of the unit allows multiple CS100's to be synchronized together. The SSR (Solid State Relay) outputs are configured to allow 3 SPDT (Single Pole Double Throw) and 1 SPST (Single Pole Single Throw) operations (Contacts are rated for direct connection to heavy industrial loads). Relay outputs and control voltage initiate time have a maximum reset time of approximately 10 milliseconds .

The CS100 Repeat Cycle Timer is housed in a standard 15-terminal plug-in round case . The timer is designed to reduce down time during replacement of the timer . The CS100 Repeat Cycle Timer is easily removed from the front Replacement timers can be plugged into the existing housing, eliminating the need for rewiring . The housing is panel mounted in a standard 3 19" round cutout.

Features:

• Power: 100-132VAC @ 50-60 Hz
• Power Consumption: 2 4VA
• Time Ranges: T1 = 0 1 to 25 seconds; T2 = 0 to 24 seconds; T3 = 0 to 25 seconds
• Timing Mode: Repeat Cycle
• Time Setting: Front Panel Keypad
• Transient Voltage Protection: Metal Oxide Varistor
• Operating Temperature: 0-50°C
• NEMA Rating: NEMA 12
• Contact Ratings: 4A @ 130VAC (AC Switching Only)
• Maximum Off State Leakage Current @ Maximum Voltage: 0 1mA
• Termination: Screw Terminals
• Display 2 (7-segment) Red LED's