Bellofram Factory Preset Type 65 Regulator, 1/4" NPT, 40-60 PSI, 960-151-000
Are you buying in volume? Are you an OEM? Are you a reseller? Be sure to contact FLW directly for your special pricing.
Description
Type 60 & Type 65 Precision Air Regulators are reliable precision units designed for instrumentation and general purpose use. The Type 60 is a preset, fixed-pressure unit with a dripwell. The Type 65 is without a dripwell. Test data for these regulators show excellent performance characteristics compared with those of similar units presently on the market. These Marsh Bellofram regulators are generally superior in regulated pressure vs. flow, forward-to-reverse flow offset, supply pressure sensitivity, repeatability and stability. Ruggedly designed and constructed, the regulators have housings of die cast aluminum. Both models are finished with vinyl paint (which resist scratching, weathering and other physical abuse), and are pressure and leak tested prior to shipment from the factory.
Careful design and quality materials throughout assure long, trouble-free operation in the most difficult industrial environments. A rubberized, soft-seat valve stem provides positive shut-off and "forgives" dirt or other foreign matter. An aspirator maintains downstream pressure and compensates for droop when high flow occurs. The gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. The Type 65 regulator has a 60-mesh 304 stainless steel screen to block foreign particles from entering the output stream. The Type 60 regulator has a unique self-cleaning nylon 40 micron mesh filter that can be easily removed. Type 60 and Type 65 tamper resistant regulators meet OSHA requirements for air supplied to hand-held air guns (if preset to 30 PSIG).
Features:
Careful design and quality materials throughout assure long, trouble-free operation in the most difficult industrial environments. A rubberized, soft-seat valve stem provides positive shut-off and "forgives" dirt or other foreign matter. An aspirator maintains downstream pressure and compensates for droop when high flow occurs. The gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. The Type 65 regulator has a 60-mesh 304 stainless steel screen to block foreign particles from entering the output stream. The Type 60 regulator has a unique self-cleaning nylon 40 micron mesh filter that can be easily removed. Type 60 and Type 65 tamper resistant regulators meet OSHA requirements for air supplied to hand-held air guns (if preset to 30 PSIG).
Features:
- Pre-Set, ideal for OSHA regulations
- Superior regulation characteristics
- Rugged, corrosion-resistant construction
- Excellent stability and repeatability
- Self-relieving
- Low Droop at High Flow
- Several mounting options
- Low cost
- Pilot-operated controllers
- Related instruments
- Air chucks
- Air spray guns
- Air cylinders and actuators
- Industrial pneumatic systems and equipment
Product Specifications
General Specifications
Sensitivity: | 1" (2.5 cm) Water Column |
---|---|
Flow Capacity @ 100 PSIG (6.9 BAR) Supply and 20 PSIG (1.4 BAR) outlet: | 20 SCFM (566 LPM) |
Effect of Supply Pressure Variation (25 PSIG/1.7 BAR) on Outlet Pressure: | Less than 0.2 PSIG (0.01 BAR) for 25 PSIG (1.7 BAR) |
Exhaust Capacity 5 PSIG (0.35 BAR) above 20 PSIG set point: | 0.1-0.45 SCFM Typical 2.8 - 12.7 LPM |
Max Supply Pressure: | 250 PSIG (17.2 BAR) |
Effect of Changes in Flow on Regulated Pressure (100 PSIG / 6.9 BAR Supply): | 3 PSIG (0.2 BAR) for 10 SCFM ( 283 LPM) (1/4 NPT, 20 PSIG / 1.4 BAR set point) |
Setpoint Range: | 40-60 PSIG (2.8-4.1 BAR) |
Total Air Consumption @ Maximum Output: | 6 SCFH (2.84 LPM) Maximum |
Port Size: | 1/4 NPT |
Materials of Construction: | Body: Die cast aluminum w/ vinyl paint Adjusting Screw: Plated steel Trim: Plated Steel, Brass, Acetal Resin Diaphragm: Buna-N Elastomer and Polyester Fabric Knob: Phenolic Plastic (option) Spring: Music wire |
Mounting Options: | Pipe or Bracket |