• Bellofram Type 10 HR High Relief Capacity Precision Regulator, 3/8" NPT, 2-120 PSI, 960-030-000
  • Bellofram Type 10 HR High Relief Capacity Precision Regulator, 3/8" NPT, 2-120 PSI, 960-030-000

Bellofram Type 10 HR High Relief Capacity Precision Regulator, 3/8" NPT, 2-120 PSI, 960-030-000

$239.83 $239.83
Are you buying in volume? Are you an OEM? Are you a reseller? Be sure to contact FLW directly for your special pricing.  
Shipping Weight:
1.00 LBS

FREE Ground Shipping


The Marsh Bellofram Type 10 Air Pressure Regulator is designed to control output pressure with accuracy of 0.1% and high-repeatability, with very low sensitivity to changes in supply pressure, ambient temperature and flow.

The highly rugged design of the Type 10 includes unique features such as high start-up stability, which eliminates the need for regulated start pressure readjustment after long downtimes with automatic return to output setting at start-up; incorporation of a high-gain pneumatic servo amplifier for regulated pressure, ranging from dead end to 20 cubic meters per hour (12 SCFM), held constant over substantial flow changes; incorporation of an extra-large capacity integral relief valve, for exhaust flow when regulated pressure is reset to a lower value, with automatic high downstream relief under dead end conditions; and incorporation of a high-performance servo-operated control mechanism in the regulator, for added pressure stability. The entire measuring element, including pilot valve, is fabricated from heat-treated stainless steel to eliminate hysteresis or permanent deformation under all working conditions. An integral relief valve provides for exhaust flow whenever the regulated pressure is reset to a lower value. In addition, the available Type 10 motorized configuration allows for easy integration into open- or closed-loop process control systems and programmable controllers.

  • Highly Accurate Pressure Regulation to 0.1%
  • Start-up Stability, Allowing Regulated Pressure to Return to Output Setting
  • Automatic High Downstream Relief Capacity
  • High-gain Pneumatic Servo Amplifier Regulates Wide Fluctuations in Flow
  • Especially Good Performance from Dead End to 12 SCFM
  • Locking Capability
  • Temperature Stability
  • Units may be installed in any position and panel mounted or supported by inline plumbing
  • Available variations to meet particular requirements, such as high-relief, low-range and motorized configurations
  • Pipe and Vessel Air Pressure Monitoring
  • Industrial Processes
  • HVAC, Remote Pressure Control Ventilation Systems
  • Electro-pneumatic Control
  • Inspection Procedures
  • Control and Analysis Instrumentation
  • Medical Equipment Actuation
  • Gas Mixing
  • Valve Operation and Gate Actuation
  • Positioned Signaling
  • Calibration Stands
  • Air Gauging
  • Cylinder Loading
  • Force Balance Hoists
  • Disc and Shoe Air Braking
  • Clamp Units
  • Web Tensioning
  • Roll Loading
  • Press Units

Product Specifications

General Specifications

Maximum Supply Pressure:150 PSIG / 10.3 BAR
Pressure Ranges:2-120 PSIG (0.1-8.3 BAR)
Port Sizes:3/8 NPT
Effect of Supply Pressure Variation on Outlet Pressure:0.005 PSIG / 0.3 mBAR per 25 PSIG / 1.7 BAR change
Sensitivity:1/8" / 3.2mm of water
Bleed Rate:4.8 SCFH / 2.3 LPM
Forward Flow Capacity:14 SCFM / 396 LPM
Exhaust Capacity @ 5 PSIG (0.4 BAR) above setpoint:10 SCFM / 283 LPM
Temperature Range:-20 to 160°F (-29 to 71°C)
Effects of Changes in Flow on Regulated Pressure:0.25 PSIG / 0.01 BAR per 10 SCFM / 283 LPM

Literature & Docs