Loading... Please wait...
Bellofram Type 50 Filter/Dripwell Regulator, 1/4" NPT, 0-120 PSI, 960-069-000
Are you buying in volume? Are you an OEM? Are you a reseller? Be sure to contact FLW directly for your special pricing.
Description
The Marsh Bellofram Type 50/Type 50 NACE Precision Filter Air Set Regulators are reliable, precision filter air set pressure regulators, designed for instrumentation and general purpose use in both standard (Type 50) and corrosive environments (Type 50 NACE). The Type 50 NACE complies with NACE material requirement #MR-01-75 for sulfide stress cracking-resistant metallic materials for oil field equipment.
The rugged design and construction of the Type 50 includes the incorporation of die cast aluminum housings that are finished with epoxy paint for added protection against scratching, weathering and other challenging environments. Careful design and use of quality materials ensure long, trouble-free operation, even in the most difficult of industrial environments. The user-adjustable Type 50 series offers superior pressure regulation vs. flow characteristics, excellent stability, repeatability and built-in filter with dripwell. A rubberized, soft-seat valve stem provides positive shut-off and "forgives" dirt or other foreign matter. An aspirator maintains downstream pressure and compensates for droop when high flow occurs. A gauge port facilitates convenient gauge installation and can be used as an additional full flow outlet. In addition, Type 50 NACE regulators include an easily serviceable and self-cleaning 316 stainless steel mesh filter that can be side, panel, pipe or through-body mounted.
Features:
The rugged design and construction of the Type 50 includes the incorporation of die cast aluminum housings that are finished with epoxy paint for added protection against scratching, weathering and other challenging environments. Careful design and use of quality materials ensure long, trouble-free operation, even in the most difficult of industrial environments. The user-adjustable Type 50 series offers superior pressure regulation vs. flow characteristics, excellent stability, repeatability and built-in filter with dripwell. A rubberized, soft-seat valve stem provides positive shut-off and "forgives" dirt or other foreign matter. An aspirator maintains downstream pressure and compensates for droop when high flow occurs. A gauge port facilitates convenient gauge installation and can be used as an additional full flow outlet. In addition, Type 50 NACE regulators include an easily serviceable and self-cleaning 316 stainless steel mesh filter that can be side, panel, pipe or through-body mounted.
Features:
- Superior Regulation Characteristics
- Rugged, Corrosion-resistant Construction
- Excellent Stability and Repeatability
- Self-relieving
- Integral 40 Micron, Self-cleaning Filter
- Low Droop at High Flow
- Several Mounting Options
- Meets ATEX II 2 G Dc T 6 (Non-electrical Certification)
- Units are Both Pressure and Leak Tested Before Factory Shipment
- Oilfield Equipment (NACE approved version)
- Chemical Processing Plants (NACE approved version)
- Corrosive Industrial Environments (NACE approved version)
- Air Chucks
- Air Spray Guns
- Air Cylinders and Actuators
- Industrial Pneumatic Systems and Equipment
- Pilot-operated Controllers and Instruments
Product Specifications
General Specifications
| Sensitivity: | 1" Water Column (2.5 cm) |
|---|---|
| Flow Capacity @ 100 PSIG (6.9 BAR) Supply and 20 PSIG (1.4 BAR) outlet: | 20 SCFM (566 LPM) |
| Effect of Supply Pressure Variation (25 PSIG/1.7 BAR) on Outlet Pressure: | Less than 0.2 PSIG (0.01 BAR) |
| Exhaust Capacity 5 PSIG (0.35 BAR) above 20 PSIG set point: | 0.1-0.45 SCFM Typical 2.8 - 12.7 LPM |
| Max Supply Pressure: | 250 PSIG (17.2 BAR) |
| Effect of Changes in Flow on Regulated Pressure (100 PSIG / 6.9 BAR Supply): | 4 PSIG / 0.3 BAR over flow of 10 SCFM / 283 LPM (1/4 NPT, 20 PSIG / 1.4 BAR set point) |
| Output Pressure Ranges: | 0-120 PSIG (0-8.3 BAR) |
| Temperature Range: | 0-160°F (-18 to 71°C) |
| Total Air Consumption @ Maximum Output: | 6 SCFH (2.8 LPM) |
| Port Size: | 1/4 NPT |
| Materials of Construction: | Body: Die cast aluminum w/ vinyl paint Adjusting Screw: Plated steel Trim: Plated Steel, Brass, Acetal Resin Diaphragm: Buna-N Elastomer and Polyester Fabric Knob: Phenolic Plastic (option) Spring: Music wire |
| Tamper Resistant Cover: | Yes |
| Mounting Options: | Pipe, Panel, Bracket or Thru Body Holes |