Description Specifications Literature Description The Type 40 Air Pressure Regulator is a reliable adjustable air pressure regulator, designed for instrumentation and general purpose use. Test data for the Type 40 shows excellent performance characteristics in such areas as regulated pressure vs. flow, forward-to-reverse flow offset, supply pressure sensitivity, repeatability and stability, among others.Careful design and selection of quality construction materials throughout ensure long, trouble-free operation, including diecast aluminum housings, finished with scratch- and weather-resistant vinyl paint. A rubberized, soft-seat valve stem provides positive shut-off and "forgives" dirt or other foreign matter. An aspirator maintains downstream pressure and compensates for droop when high flow occurs. The gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. In addition, an integral 60-mesh 304 stainless steel screen blocks foreign particles from entering the output stream.Features:Sensitivity: 1" Water Column (2.5 cm)Superior Air Pressure RegulationRugged, Corrosion Resistant ConstructionLow CostExcellent Stability and RepeatabilitySelf-relievingLow Droop at High FlowMultiple Mounting OptionsAll Units are Pressure and Leak Tested Prior to ShipmentApplications:Air ChucksAir Spray GunsAir Cylinders and ActuatorsIndustrial Pneumatic Systems and EquipmentPilot-operated Controllers and Instruments State of California Proposition 65 WARNINGCancer and Reproductive Harm - www.P65Warnings.ca.gov. Product Specifications General SpecificationsSensitivity:1" Water Column (2.5 cm)Flow Capacity @ 100 PSIG (6.9 BAR) Supply and 20 PSIG (1.4 BAR) outlet:20 SCFM (566 LPM)Effect of Supply Pressure Variation (25 PSIG/1.7 BAR) on Outlet Pressure:Less than 0.2 PSIG (0.01 BAR)Exhaust Capacity 5 PSIG (0.35 BAR) above 20 PSIG set point:0.1-0.45 SCFM Typical 2.8 - 12.7 LPMMax Supply Pressure:250 PSIG (17.2 BAR)Effect of Changes in Flow on Regulated Pressure (100 PSIG / 6.9 BAR Supply):2 PSIG over flow of 10 SCFM / 283 LPM(0-30 PSIG / 0-2.1 BAR range 1/4 NPT,20 PSIG / 1.4 BAR set point)Set Point Range:0-10 PSIG (0-0.7 BAR)Temperature Range:0-160°F (-18 to 71°C)Total Air Consumption @ Maximum Output:6 SCFH (2.8 LPM)Port Size:1/4 NPT, BSPTMaterials of Construction:Body: Die cast aluminum w/ vinyl paintAdjusting Screw: Plated steelTrim: Plated steel, brass, acetal resinDiaphragm: Buna-N elastomer and polyesterSpring: Music wireTamper Resistant Cover:OptionalMounting Options:Pipe, Panel or Bracket Literature & Docs Product Specifications Accessories