Description Specifications Literature Description The Type 70BP High-Flow Back Pressure Air Regulator is a high-flow, high-precision pneumatic relief valve with adjustable set point. It is expressly designed for applications requiring high flow capacity and accurate pressure controls. It may be used in place of a standard relief valve to improve pressure control while maintaining protection against over-pressurization of supply pressure lines to instruments and other control devices.The Type 70BP is most often used in conjunction with diaphragm-operated valve and bleed orifice as a compressor controller. Excess compressor pressure is relieved through the regulator to actuate the intake restricting valve. When the regulator is shut off, downstream air escapes through the bleed orifice, allowing the restricting valve to open. Units are designed to respond quickly to minute changes in upstream pressure. Incorporation of a patented Bellofram rolling diaphragm design offers reliable performance over millions of cycles. Stack up construction may be disassembled and serviced without removal from the air line, thus reducing downtime.Features:High Flow Capacity of Up to 50 SCFM (1400) LPMAccurate Pressure ControlsMay Be Used in Place of a Standard Relief ValveUnits Respond Quickly to Minute Upstream Pressure ChangesStack-up Construction May Be Disassembled and Service Without Removal from Air LineApplications:Precision High-Flow Back Pressure ReliefPrecise Control of Paper Machinery Felt GuidesPneumatic Clutch RegulationPressure Cylinder ControlProtection of Instrument and Control Device Supply Pressure Line State of California Proposition 65 WARNINGCancer and Reproductive Harm - www.P65Warnings.ca.gov. Product Specifications General SpecificationsSensitivity:1/8" (3.2 mm) Water ColumnFlow Capacity: 50 SCFM (1416 LPM)Maximum Supply Pressure:250 PSIG (17.2 BAR)Set Point Range:0-60 PSIG (0-4.1 BAR)Temperature Range:-40° to 200° F (-40° to 93° C)Port Size:1/4 NPTMaterials of Construction:Body: Diecast aluminum w/ vinyl paintAdjusting Screw: Plated steelTrim: Acetal, brass, plated steel, nitrileDiaphragm: Buna-N w/ polyester fabricKnob: Phenolic plasticSpring: Music wireSize:3.0" X 3.0" X 6.0" (76 X 76 X 152 mm)Preset Pressure:NoTamper Resistant Cover:YesMounting:Pipe, panel, or bracket Literature & Docs Product Specifications Accessories