Bellofram Type 70 High Flow Air Pressure Regulator, 3/8" NPT, 0-10 PSI, 960-131-000
$133.01
Are you buying in volume? Are you an OEM? Are you a reseller? Be sure to contact FLW directly for your special pricing.
Description
The Marsh Bellofram Type 70 High-Flow Air Pressure Regulator is expressly designed for applications requiring substantial flow capacity of up to 80 SCFM (2250 LPM) and accurate pressure controls. Downstream pressure can be set within 0.25 in. (6.3mm) of water column and is accurately maintained under varying conditions via an aspirator tube which adjusts air supply in accordance with flow velocity. A balanced supply valve, utilizing a patented Bellofram rolling diaphragm design, makes the regulator virtually immune to changes in supply pressure, and offers millions of cycles.
The Type 70 features a rugged, precision die-cast aluminum housing, and is pressure-tested and chromate-treated for internal corrosion resistance. The regulator housing is finished with vinyl paint which resists scratching, weathering and other physical abuse.
Features:
The Type 70 features a rugged, precision die-cast aluminum housing, and is pressure-tested and chromate-treated for internal corrosion resistance. The regulator housing is finished with vinyl paint which resists scratching, weathering and other physical abuse.
Features:
- High Flow Capacity - Up to 80 SCFM (2266 LPM)
- Responds Quickly to Minute Changes in Downstream Pressure
- Dampening Action of Aspirator Tube Maintains Downstream Pressure
- Honking & Buzzing Eliminated By Action of Integral Baffle and Aspirator Tube
- Stack-up Construction Can Be Disassembled & Serviced without Removal from Air Line
- Optional Versions Include: Non-Relieving, Corrosive Resistant Epoxy Finish, Tapped Vent, Mounting Brackets, Pressure Gauge, Low Bleed, Check Valve
- Large Flow Actuation
- High-flow Louvers
- Rollers and Winders
- High-flow Control Loops
- Calibration Loops
- Any OEM or Industrial Pressure Regulator Application Where a High Degree of Accuracy is Required
Product Specifications
General Specifications
Sensitivity: | 1/4" (6.4 mm) Water Column |
---|---|
Flow Capacity: | 40 (1113 LPM) 50 (1416 LPM) or 80 SCFM (2266 LPM) |
Effect of Supply Pressure variation (25 PSIG) on Outlet Pressure: | < 0.025 PSIG (1.7 BAR) |
Exhaust Capacity (5 above PSIG 20 PSIG set point): | 4 SCFM (113 LPM) |
Maximum Supply Pressure: | 250 PSIG (17.2 BAR) |
Effect of Changes in Flow on Regulated Pressure (100 PSIG/6.9 BAR Supply): | 2.5 PSIG (0.2 BAR) over flow 50 SCFM (1416 LPM) (3/8 NPT, 0-30 PSIG / 0-2.1 BAR range, 15 PSIG / 1 BAR set point) |
Output Pressure Range: | 0-10 PSIG (0-0.7 BAR) |
Total Air Consumption @ Maximum Output: | from 1.0 to 12.5 SCFH (0.5-6 LPM) |
Temperature Range: | -40° to 200° F (-40° to 93° C) |
Port Size: | 3/8 NPT |
Materials of Construction: | Body: Diecast aluminum w/ vinyl paint Adjusting Screw: Plated steel Trim: Plated steel, brass, acetal resin Diaphragm: Buna-N w/ polyester fabric Knob: Phenolic plastic Spring: Music wire |
Size: | 3.0" X 3.0" X 6.0" (76 X 76 X 152 mm) |
Preset Pressure: | No |
Tamper Resistant Cover: | Yes |
Mounting: | Pipe, panel, or bracket |