Bellofram Type 92 Subminiature Air Regulator, 1/16" NPT, 0-5 PSI, 960-540-000
$105.00
Are you buying in volume? Are you an OEM? Are you a reseller? Be sure to contact FLW directly for your special pricing.
Description
Type 92 Subminiature Regulators from Bellofram PCD are compact, low-cost units which operate in pressure ranges up to 100 PSI, with a maximum supply pressure of 150 PSI. It provides dependable reliability and accuracy for low flow or dead end applications.
With the new Type 92, Marsh Bellofram has created a subminiature regulator with a true rolling diaphragm design. Most subminiature regulators utilize a flat diaphragm. In this small of a regulator, such a design causes excessive droop and low stability. By utilizing a larger diameter rolling diaphragm, the Type 92 regulator offers a more sensitive regulator with excellent stability and significantly less droop. The Type 92 subminiature regulator is available with a corrosion resistant anodized aluminum body and bonnet. It also comes standard with a fluorocarbon diaphragm.
These regulators are idea for use in applications with limited space and for low flow or dead end service. Their small package size and lightweight construction allow for ease of installation. Both standard and low bleed versions are available. They are self-relieving and offer excellent stability and repeatability.
Features:
With the new Type 92, Marsh Bellofram has created a subminiature regulator with a true rolling diaphragm design. Most subminiature regulators utilize a flat diaphragm. In this small of a regulator, such a design causes excessive droop and low stability. By utilizing a larger diameter rolling diaphragm, the Type 92 regulator offers a more sensitive regulator with excellent stability and significantly less droop. The Type 92 subminiature regulator is available with a corrosion resistant anodized aluminum body and bonnet. It also comes standard with a fluorocarbon diaphragm.
These regulators are idea for use in applications with limited space and for low flow or dead end service. Their small package size and lightweight construction allow for ease of installation. Both standard and low bleed versions are available. They are self-relieving and offer excellent stability and repeatability.
Features:
- Designed for applications with limited space and for low flow or dead end service
- Small package size and lightweight construction
- Standard or low bleed versions available
- Corrosion resistant anodized aluminum exterior
- Excellent stability and repeatability
- Self-relieving
- Low cost
Product Specifications
General Specifications
Effect of Supply Pressure Variation (25 PSIG) on Outlet Pressure: | < 0.5 PSIG (35.5 mBAR) |
---|---|
Exhaust Capacity (5 PSIG above 20 PSIG set point): | 0.1-0.3 SCFM Typical (2.8-8.5 LPM) |
Maximum Supply Pressure: | 150 PSIG (10.3 BAR) |
Flow Capacity at 100 PSIG (6.9 BAR) Supply and 20 PSIG (1.4 BAR) Outlet: | 5 SCFM (141 LPM) |
Set Point Range: | 0-5 PSIG (0-0.3 BAR) |
Total Air Consumption at Max Output Pressure: | 0.3 SCFH (0.14 SLPM) |
Operating Temperature Range: | 0 - +160°F ( -18°- 71°C) |
Port Size: | 1/16 NPT - Side and Bottom Ports |
Materials of Construction: | Body: Anodized Aluminum Bonnet: Anodized Aluminum Trim: Acetal, Brass, Stainless Steel Diaphragm: Fluorocarbon w/ Polyester Fabric Knob: Acetal Resin Spring: Stainless Steel, Music Wire |
Mounting Options: | Pipe or Panel |