Description Specifications Literature Description The Type 52SS regulator product line is designed for service with a wide variety of corrosive gases and environments. Special construction features include 316 stainless steel for the housing and filter assemblies with fluorocarbon elastomers used for the control diaphragm and the supply valve.These corrosion resistant materials are compatible with sour gas and for use in off-shore environments. Typical applications include petrochemical processing, chemical plants, food processing and paper/pulp mills.This ruggedly built regulator operates in pressure ranges up to 150 PSIG (10 BAR). The Type 52SSFR and Type 52SSAR Regulators have built-in dripwells which trap water, oil and other contaminants. The contaminants are easily flushed out of the dripwell via a convenient manual or automatic drain valve. The 25 Micron Filter is constructed of sintered 316 stainless steel, and is easily removed.The Type 52SS products can be through-panel mounted with the mounting nut supplied, bracket-mounted using the optional bracket, or pipe mounted by its ports.The regulators and filter assemblies comply with NACE material requirement #MR0175 for sulfide stress cracking resistant metallic material for oil field equipment.Features:Ideal for sour gas and corrosive applications or environmentsExcellent stability and repeatabilityLow droopTapped vent for exhaust gas captureBuilt-in filter assemblies and dripwellsManual or automatic drain optionsPanel, bracket or pipe mounting State of California Proposition 65 WARNINGCancer and Reproductive Harm - www.P65Warnings.ca.gov. Product Specifications General SpecificationsFilter:Built in 25 micron filter w/ auto-drainMaximum Supply Pressure:425 PSIG (29.3 BAR)Output Pressure Range:15 - 150 PSIG (1 - 10 BAR)Supply Pressure Sensitivity @ 25 PSIG /1.7 BAR change in supply:± 1.0 PSIG (0.07 BAR) Output ChangeRepeatability:± 0.25 PSIG (0.02 BAR)Port Sizes:1/4" NPT Flow @ 100 PSIG (6.9 BAR)Supply 20 PSIG (1.4 BAR) outlet:38 SCFM (1075 LPM)Exhaust Capacity @ 5 PSIG (0.34 BAR) above setpoint:0.1 SCFM (2.8 LPM)Temperature Range:-4 to 176° F (-20 to 80° C)Air Consumption:0.5 SCFH (0.24 LPM) MaximumMaterials of Construction:316 Stainless Steelhousing and filter assembliesfluorocarbon elastomers Literature & Docs Accessories