Loading... Please wait...
Bellofram Type T-52SSR Standard Regulator Version, 3/8" NPT, 6-60 PSI, 960-565-000
$367.84
Are you buying in volume? Are you an OEM? Are you a reseller? Be sure to contact FLW directly for your special pricing.
Description
The Type 52SS regulator product line is designed for service with a wide variety of corrosive gases and environments. Special construction features include 316 stainless steel for the housing and filter assemblies with fluorocarbon elastomers used for the control diaphragm and the supply valve.
These corrosion resistant materials are compatible with sour gas and for use in off-shore environments. Typical applications include petrochemical processing, chemical plants, food processing and paper/pulp mills.
This ruggedly built regulator operates in pressure ranges up to 150 PSIG (10 BAR). The Type 52SSFR and Type 52SSAR Regulators have built-in dripwells which trap water, oil and other contaminants. The contaminants are easily flushed out of the dripwell via a convenient manual or automatic drain valve. The 25 Micron Filter is constructed of sintered 316 stainless steel, and is easily removed.
The Type 52SS products can be through-panel mounted with the mounting nut supplied, bracket-mounted using the optional bracket, or pipe mounted by its ports.
The regulators and filter assemblies comply with NACE material requirement #MR0175 for sulfide stress cracking resistant metallic material for oil field equipment.
Features:
These corrosion resistant materials are compatible with sour gas and for use in off-shore environments. Typical applications include petrochemical processing, chemical plants, food processing and paper/pulp mills.
This ruggedly built regulator operates in pressure ranges up to 150 PSIG (10 BAR). The Type 52SSFR and Type 52SSAR Regulators have built-in dripwells which trap water, oil and other contaminants. The contaminants are easily flushed out of the dripwell via a convenient manual or automatic drain valve. The 25 Micron Filter is constructed of sintered 316 stainless steel, and is easily removed.
The Type 52SS products can be through-panel mounted with the mounting nut supplied, bracket-mounted using the optional bracket, or pipe mounted by its ports.
The regulators and filter assemblies comply with NACE material requirement #MR0175 for sulfide stress cracking resistant metallic material for oil field equipment.
Features:
- Ideal for sour gas and corrosive applications or environments
- Excellent stability and repeatability
- Low droop
- Tapped vent for exhaust gas capture
- Built-in filter assemblies and dripwells
- Manual or automatic drain options
- Panel, bracket or pipe mounting
Product Specifications
General Specifications
| Maximum Supply Pressure: | 425 PSIG (29.3 BAR) |
|---|---|
| Output Pressure Range: | 6 - 60 PSIG (.4 - 4 BAR) |
| Supply Pressure Sensitivity @ 25 PSIG / 1.7 BAR change in supply: | ± 1.0 PSIG (0.07 BAR) Output Change |
| Repeatability: | ± 0.25 PSIG (0.02 BAR) |
| Port Sizes: | 3/8" NPT |
| Flow @ 100 PSIG (6.9 BAR) Supply 20 PSIG (1.4 BAR) outlet: | 42 SCFM (1188 LPM) |
| Exhaust Capacity @ 5 PSIG (0.34 BAR) above setpoint: | 0.1 SCFM (2.8 LPM) |
| Temperature Range: | -4 to 176° F (-20 to 80° C) |
| Air Consumption: | 0.5 SCFH (0.24 LPM) Maximum |
| Materials of Construction: | 316 Stainless Steel housing and screen fluorocarbon elastomers |