• Meriam 4-20 Milliamp Loop Calibrator M334

Meriam 4-20 Milliamp Loop Calibrator M334

$750.00
Are you buying in volume? Are you an OEM? Are you a reseller? Be sure to contact FLW directly for your special pricing.  
Quantity:
Availability:
PART NUMBER:
M334
Shipping Weight:
1.00 LBS
Shipping:

FREE Ground Shipping

Description

The Meriam M334 is a state of the art, highly reliable, rugged and easy to use milliamp calibrator. It has the functions necessary to perform all the required maintenance and calibration tasks of virtually any 4-20mA loop. It provides source and read milliamp functions along with power and measure; and two wire transmitter simulations. In addition it can measure DC Voltage for troubleshooting power supplies.

The M334 is functionally equivalent to similar calibrators with many additional benefits. These improvements include better long term stability, accuracy, reliability and ruggedness including significantly improved battery life. The combined improvements allow the Meriam M334 to meet or exceed all of the expected performance and functions of similar products.

The M334 will also exceed the performance of many higher cost calibrators and meet today's most demanding requirements while maintaining the familiar, time proven reliability and ease of use of similar calibrators. This is the new standard!

Features:
  • Source 0.00 to 24.00 mA (-25.00% to 125.0%)
  • Read 0.00 to 52.00 mA (-25.0% to 300.0%)
  • Simulate 2-wire transmitters
  • Power and measure 2-wire transmitters
  • Accuracy to better than 0.025% (+1/2 LSD) - within +0.005 mA from 4.00 and 20.00 mA EZ-Checks
  • Large high contrast graphic display viewable in all lighting conditions and angles
  • Read voltage function 0.00 to +99.99 VDC
  • EZ-dial know easiliy adjusts output by 0.01 mA (0.01%)
  • EZ-Check 3-position slide switch - instantly output 4.00 or 20.00 mA calibration values
  • Overload protected - 135 vrms protection. Fuse-less protection from accidental misconnection
  • Compact, lightweight and rugged with heavy protective rubber boot

Product Specifications

General Specifications

Operating Temperature Range:-20 to 60° C (-5 to 140° F)
Storage Temperature Range:-30 to 60° C (-22 to 140° F)
Relative Humidity Range:10% ≤RH ≤90% (0 to 35° C), Non-condensing
10% ≤RH ≤70% (35 to 60° C), Non-condensing
Batteries:Four "AA" Alkaline 1.5V (Duracell MN1500 or equivalent)
Optional 120 VAC 50/60 Hz AC adaptor available NiMh Rechargeable battery kit available
Miscellaneous:Low battery indication with nominal 1 hour of operation left
Over-voltage protection to 135 vrms (rated for 30 seconds) or 240 vrms (rated for 15 seconds)
High contrast graphic liquid crystal display with 0.413" (10.5 mm) high digits