Description Specifications Literature Description The KOBOLD PSR and PS are simple, economical and reliable monitors for flow switching applications. They operate as follows: The flowing media presses against the paddle fitted to one end of a balance arm which is in direct contact with a pre-stressed leaf spring. At the other end of the arm is a permanent magnet. This magnet actuates a reed contact in a bistable fashion located within a movable housing located outside of the media. The reed contact switches on or off depending on the position of the magnet and the switch housing. The switch status may then be used to control flow as the contacts can be set to normally open or normally closed. The PSR is made of brass or stainless steel with ¼" NPT to 1-½" NPT fittings. The PS is made of brass or stainless steel with a ½" NPT fitting and is designed for installation in 2" to 8" pipes. Common applications include: cooling and lubricant circuits, dry running protection for pumps, prevention of low water levels, and monitoring for pipe breakage. Features Switch Point Adjustable Easy to Install Brass or SS Construction Low Cost Maximum Pressure, Brass: 1450 PSIG Maximum Pressure, SS: 3625 PSIG State of California Proposition 65 WARNINGCancer and Reproductive Harm - www.P65Warnings.ca.gov. Product Specifications MaterialBrassConnection½" NPTIncreasing GPM (Water)0.7-1.6Decreasing GPM (Water)0.5-1.6Ambient TemperatureMax 176 °FSealNBRContact TubePolyamide, Glass ReinforcedIngress ProtectionIP 65 Literature & Docs Data Sheet Manual Accessories