AI-Tek 3 in. Diameter Split Gear 79870-202-0967
$190.00

AI-Tek also offers a 20 diametral pitch, 14.5° pressure angle, solid steel gear. This gear can be rebored to fit shaft diameters up to 1.375". It is secured to the shaft with 2 set screws.

AI-Tek 5 in. Diameter Split Gear 79870-202-1901
$335.00

When using an AI-Tek speed sensor in RPM measurement, split gears provide a convenient and simple means of installation where shaft disassembly is not feasible. The two halves of the gear are fastened with clamping screws,...

AI-Tek 6 in. Diameter Split Gear 79870-202-2001
$900.00

When using an AI-Tek speed sensor in RPM measurement, split gears provide a convenient and simple means of installation where shaft disassembly is not feasible. The two halves of the gear are fastened with clamping screws,...

AI-Tek 8 in. Diameter Split Gear 79870-202-2101
$990.00

When using an AI-Tek speed sensor in RPM measurement, split gears provide a convenient and simple means of installation where shaft disassembly is not feasible. The two halves of the gear are fastened with clamping screws,...

AI-Tek Compatible 2 Pin Connector / 10 Foot Cable 79860-01-10
$105.00

FLW stocks a selection of connectors and cable assemblies for your convenience. This item is compatible with AI-Tek cable assembly 79860-01-010 and designed for 2-wire sensors. Complete assemblies include the connector and...

AI-Tek Compatible 5 Pin Connector/ 10 Ft Cable 79860-30-010
$160.00

FLW stocks a selection of connectors and cable assemblies for your convenience. This item is designed for 5-wire sensors. Complete assemblies include the connector and 10' or 50' of recommended wiring for use with AI-Tek...

AI-Tek Compatible Right Angle 2 Socket Connector 79860-3800
$110.00

FLW stocks a selection of connectors and cable assemblies for your convenience. This item is designed for 2-wire sensors. Complete assemblies include the connector and 10' or 50' of recommended wiring for use with AI-Tek...

AI-Tek Compatible Straight 2 Socket Connector 79860-3100
$75.00

FLW stocks a selection of connectors and cable assemblies for your convenience. This item is designed for 2-wire sensors. Complete assemblies include the connector and 10' or 50' of recommended wiring for use with AI-Tek...

AI-Tek Locknut 135-0034-001
$5.00

AI-TEK 5/8-18 NUT

Alnor 8 ft Norprene Tubing 372000000
$15.00

Alnor 8 ft (2.5 m) norprene tubing.

Alnor Air Cone Kit 801750
$240.00

Alnor air cones have been developed as a tool for use with 100 mm diameter vane anemometers. The anemometer is snap located into the aircone and held with the seal against the supply/extract grille to be measured. Kit...

Alnor Air Flow Probe 18 in 800187
$385.00

Alnor 18 in straight air flow probe (5/16 in diameter) for EBT720, EBT721 and AccuBalance® 8375.

Alnor Balometer Jr. Low Flow Screen 534593169
$165.00

Alnor Balometer Jr. low flow screen.

Alnor Black Velometer Hose Tubing 634040018
$25.00

Alnor Velometer tubing, black hose.

Alnor Foam Handle 534593173
$25.00

Replacement handle used on EBT and ABT series balometer capture hoods, Standard Balometer capture hood and Balometer Jr. capture hood.

Alnor HM Accessory Kit HMFIT
$220.00

Hydronic manometer accessory kit includes 34 additional fittings and (2) ITT bell and gosset read out probes.

Alnor Hood and Frame Kit 1 ft x 4 ft 634593117
$420.00

Alnor hood and frame kit 1 ft x 4 ft (305 mm x 1219 mm). Corresponds with Alnor Standard Balometer Capture Hood.

Alnor Hood and Frame Kit 1 ft x 4 ft 801200
$350.00

Alnor 1 ft x 4 ft hood and frame kit for EBT721, ABT701, ABT703 and AccuBalance® 8375; no logo.

Alnor Hood and Frame Kit 1 ft x 5 ft 634593127
$420.00

Alnor hood and frame kit 1 ft x 5 ft (305 mm x 1524 mm).

Alnor Hood and Frame Kit 1 ft x 5 ft 801202
$350.00

Alnor 1 ft x 5 ft hood and frame kit for EBT721, ABT701, ABT703 and AccuBalance® 8375; no logo.